Enabling grid and PV system protection

Requirement:

  • The SMA I/O Module is mounted and connected (see manual for the SMA I/O Module)

  • At least firmware version 3.02.xx.R must be installed on the inverter.

  • The user interface of the inverter is open and you are logged in.

Procedure:

  1. Select the inverter via the focus navigation.
  2. Select My device > Configuration > Parameters.
  3. Select the Grid and system protection parameter using the search function and set it to On.
    Set the digital input for a ripple control receiver or remote terminal unit
    Firmware Update