Additionally Required Materials and Equipment

Screws suitable for the inverter mounting base

4

For attaching the wall mounting bracket to the inverter mounting base

Washers suitable for the inverter mounting base

4

For attaching the wall mounting bracket to the inverter mounting base

Screw anchors suitable for the inverter mounting base

4

For attaching the wall mounting bracket to the inverter mounting base

Screws suitable for the battery cabinet mounting base

2

For attaching the fixing brackets to the battery cabinet mounting base

Screw anchors suitable for the battery cabinet mounting base

2

For attaching the fixing brackets to the battery cabinet mounting base

Screws suitable for the temperature and humidity sensor mounting base

2

For attaching the temperature and humidity sensor (max. shaft 3 mm, head width 5 mm to 8 mm)

Screw anchors suitable for the temperature and humidity sensor mounting base

2

For attaching the temperature and humidity sensor (max. shaft 3 mm, head width 5 mm to 8 mm)

Field-assembly RJ45 connector with metal enclosure

1-2

Only required if the network cables for the inverter are not equipped with RJ45 connectors

Means of transport (e.g., pallet truck or hand truck)

1

Used to transport packed components to the installation site

Eye bolt (M10)

2

Only required if the inverter is to be transported with a hoist

Lifting gear

1

Only required if the inverter is to be transported with a hoist

Utility knife

1

Used to unpack the product

Torx screwdriver (TX25)

1

Used to attach and remove carrying handles on the inverter and to mount the battery

Torx screwdriver (TX30)

1

Used to mount the battery

Torx screwdriver (TX40)

1

Used to attach the mounting brackets, to attach the product to the mounting brackets, to attach the connection plate to the product, to connect additional grounding

Cross-head screwdriver (PH2)

1

Used to attach the battery modules and the battery management system in the battery cabinet

Allen key (AF8)

1

Used to connect the AC cables to the inverter

Allen key (AF10)

1

Used to attach and remove the cover of the inverter enclosure

3 Nm to 30 Nm torque wrench

1

Used to tighten bolted connections

10 mm and 13 mm socket

1

Example: For tightening grounding connections

8 mm hexagonal socket (recommended minimum length: 120 mm)

1

Used to assemble and disassemble pan head screws in the battery cabinet cover when replacing them with eye bolts

Measuring device with a measurement range designed for the maximum AC and DC voltage of the inverter

1

Used to verify that no voltage is present at the inverter

Measuring device with a measurement range up to at least 1000 V DC

(1)

Used to verify that no voltage is present at the battery

Current clamp

1

For verifying that no voltage is present

Laser thermometer

1

For measuring the internal temperature of the battery modules

Press tool

1

Used to attach terminal lugs/bootlace ferrules to the DC lines

Clean cloth

1

Used to clean terminal lugs

Ethanol cleaning agent

1

Used to clean terminal lugs

Brush

1

Used to clean aluminum conductor (only necessary if cable is made of aluminum)

Protective grease

1

Used to apply to aluminum conductor (only necessary if cable is made of aluminum)

Ripple control receiver

1

Only required if a ripple control receiver is to be installed

External I/O system for the ripple control receiver

1

Only required if a ripple control receiver is to be installed and no I/O Module is to be used

Laptop with two patch cables and one USB Ethernet adapter

1

Used for commissioning

DIN rail

1

Used to mount the energy meter

Only when using the JANITZA-SP / CLCON-PWRSUPPLY: external current transformers

1

Used to connect the energy meter

Only when using a DC distributor: insulated bootlace ferrule (35 mm²)

2

For connecting the DC lines from the battery inverter to the DC distributor