Safety when Commissioning the Battery


This section contains safety information that must be observed at all times when commissioning the battery.

WARNING

Danger to life due to fire or explosion when batteries are deeply discharged

A fire may occur due to incorrect charging of deeply discharged batteries. This can result in death or serious injury.

  1. Put the battery into operation within the specified time limits.
  2. If the battery is not put into operation within the specified time limits, contact Service to request recyclization of the battery-storage system.
  3. Before commissioning the system, verify that the battery is not deeply discharged.
  4. Do not commission the system if the battery is deeply discharged.
  5. If the battery is deeply discharged, contact Service.

NOTICE

Damage to the battery due to incorrect installation or connection

The battery management system and battery modules can be damaged by incorrect installation or incorrect electrical connection.

  1. Install the battery management system and battery modules in accordance with the specifications in this manual only.
  2. Make all electrical connections on the battery management system and battery modules in accordance with the specifications in this manual only.

NOTICE

Damage to the battery due to incorrect settings

The set battery parameters influence the charging behavior of the inverter. The battery can be damaged by incorrect parameter settings.

  1. Set all battery parameters as specified in this manual.
  2. Ensure that the technical limit values of the battery are observed.

NOTICE

Damage to the display of the battery management system

The display of the battery management system can be damaged by inappropriate operation.

  1. To activate the display or confirm something, simply tap with the fingers on the highlighted area beside the display.
  2. Do not tap directly on the display.
  3. Do not use objects to tap.