Configuring the Temperature and Humidity Sensor

Qualified person

  1. Commission the temperature and air humidity sensor (see manual for the temperature and humidity sensor).
  2. Set the sampling rate for the ambient temperature and humidity measurement to 120 s.
  3. Start the temperature sensor recording. To do this, press and hold the LOGGER button on the temperature sensor for more than 2 seconds.
  4. Check that the message DATALOGGER appears on the temperature sensor display. This indicates that the temperature sensor has started recording.
  5. If the message DATALOGGER does not appear on the temperature sensor display, start the temperature sensor recording again.
    Commissioning the Primary Battery Cabinet
    Operation