Configuring the PV System

Prerequisite:

  • You must have opened an energy system project and planned it up to the project page Energy system.

Procedure:

  1. In the central workspace, click on the button [PV System].
  2. The PV system quick configuration dialog box will open.
  3. To make a quick configuration, make the required settings in the tab Technical configuration.
    or
    To configure detailed settings, Click on the button [To the detailed configuration] and make the required settings in the tab Technical configuration.
  4. Make the desired settings in the tabs Investment and operating costs, Financing and Tariffs.
  5. If you designed the PV system in the quick configuration view, click on [Apply changes].
  6. If you designed the PV system in the detailed configuration view, in the tab Technical configuration, click on the button [Cable sizing] in the Next steps area.
    Editing the building
    Configuring the battery system