Configuring the battery system

Prerequisite:

  • You must have opened an energy system project and planned it up to the project page Energy system.

Procedure:

  1. In the central workspace, click on the button [Battery system].
  2. The Battery system quick configuration dialog box will open.
  3. If the project is to be designed without battery system, disable the checkbox Take battery-storage system into account and click on [Apply changes].
  4. To make a quick configuration, make the required settings in the tab Technical configuration.
    or
    To configure detailed settings, Click on the button [To the detailed configuration] and make the required settings in the tab Technical configuration.
  5. Make the desired settings in the tabs Battery inverter, Financing and Tariffs.
  6. If you designed the battery system in the quick configuration view, click on [Apply changes].
  7. If you designed the battery system in the detailed configuration view, click on the button [Energy system] in the tab Technical configuration in the area Next steps.
    Configuring the PV System
    Planning the Energy Management