With off-grid systems: Configuring a genset

Prerequisites:

  • You must have opened a stand-alone grid project and planned it up to the page Genset.

  • The Take genset into account has been enabled.

Procedure:

  1. To adjust the parameters of a genset, go to the area Genset and select any field in the row of the desired genset.
  2. The Genset dialog box will open.
  3. If required, change the name of the genset in the Name field.
  4. Select the fuel for the genset from the drop-down list Fuel.
  5. If required, change the other settings for the genset.
  6. Click on [OK].
  7. You can check the system compatibility under Details.
    Configuring the battery system
    "Cable sizing" project page