Direct selling order with SMA SPOT

PV systems in Germany that provide a DC power of 100 kWp cannot offer unused energy via the platform SMA SPOT for direct selling. If you plan a project that meets these requirements, a message will appear stating that direct selling can be used. The option for direct selling will be enabled automatically and the project page Direct selling will be added.

You can directly download the contract between operator and Coneva GmbH after entering all details on the operator, PV system, bank details (optional) and costs. This contract must then be sent by mail to Coneva GmbH.

Calculation for direct selling only in euros

The calculations for direct selling will be carried out exclusively in euro. If you have selected USD as the currency in the personal settings in the menu My Sunny Design, calculation errors occur because the units are not converted internally.

Requirements:

  • The PV system must be located in Germany.

  • The PV system must provide a DC output of at least 100 kWp and a maximum of 1000 kWp.

  • You must have opened a project on the project page Direct selling with SMA Spot.

Procedure:

  1. Enter information on the operator and PV system in the Contract documents area.
    Note: Fields marked with an asterisk (*) are mandatory.
  2. Select the system type and yield profile in the Costs for direct selling area.
  3. In the Customer master data area, enter information on the operator, installer and, optionally, bank details.
  4. To download the direct selling documents, click on [Download contract documents].
    Overview of the communication products used
    Analyzing efficiency