Selecting inverters manually

Prerequisite:

  • You must have opened a project and planned it up to the project page Configure PV system.

Procedure:

  1. In the area Inverter design, click on the button [Manual design].
  2. The Manual design dialog box will open.
  3. To restrict the list of displayed inverters, enable the required checkboxes under Limit products.
  4. Select the row of the desired inverter.
  5. The selected row will be highlighted in light gray.
  6. Click on [OK].
  7. The Inverter grid connection dialog box will open.
  8. Select the inverter grid connection from the drop-down list.
  9. Click on [OK].
  10. The desired inverter will be added and displayed in the area PV inverter.
  11. To add further inverters, click on [Manual design].
  12. If direct selling is desired for PC systems larger than 100 kWp, confirm the query. This will add the project page Direct selling.
  13. To generate a system proposal for off-grid systems, click on [System assistant].
  14. The proposed inverters are added to the subproject and displayed in the area PV inverter.
    "Inverter design" area
    Selecting inverters from design suggestions