Configuring the battery system

Depending on the selected inverter, you can select up to 3 different batteries here.

Prerequisite:

  • You must have opened a stand-alone grid project and planned it up to the page Defining the battery system.

Procedure:

  1. If you have selected a three-phase system, on the Defining the battery system page, if necessary, enable the Multicluster Box checkbox in the area Battery system and select the desired Multicluster Box device type in the drop-down list.
  2. Select the desired battery inverter in the drop-down list Device.
  3. With multicluster systems, click on [Add cluster] to add additional clusters. With multicluster systems, all batteries are automatically configured identically.
  4. To adjust the parameters of a battery, click on the field Settings in the row of the desired battery.
  5. The Configure storage dialog box will open.
  6. Select the required battery type from the drop-down list Batteries.
  7. If required, change the other settings for the battery.
  8. Click on [OK].
  9. For stand-alone grid projects: Check the system compatibility in the Details area.
    Setting Criterion for Sorting the Design Suggestions
    With off-grid systems: Configuring a genset