Entering project data

  1. Add a new project or open an existing project.
  2. The Enter project data page will open.
  3. Enter the desired Project name.
  4. Upload images if desired.
  5. Select Project status from the drop-down list.
  6. Enter customer data in the field Customer. Here, a drop-down list will customers will appear when you click in the field and customer data has already been saved.
  7. To add a new customer, click on [New customer].
  8. The Customer data window will open. Enter the customer data.
  9. To edit a selected costumer, click on .
  10. Click to assign a customer from the customer database.
  11. The Customer data window will open.
  12. To assign customer data to the project, select the customer in the results list and then click on Apply customer in the context menu.
  13. In the area Location of building, select the desired project location.
  14. Under Voltage level, select either [Low voltage] or [Medium voltage].
  15. If you have selected [Low voltage], select the required grid voltage from the drop-down list Inverter grid connection. You can adjust this entry as required after selecting the inverter. Under Preferred minimum nominal power ratio, set a specification for the preferred minimum nominal power ratio.
  16. If you have selected [Medium voltage]: Select System type, set a specification for the preferred minimum nominal power ratio under Preferred minimum nominal power ratio, set a specification for the Medium voltage and, in the drop-down list Inverter grid connection, enter the desired grid voltage.
  17. If required, open the area Advanced project data and make additional settings.

    Also see:

    Project page "Project data"
    Upload project images