Configuring electrical loads

You can configure up to 5 loads.

Prerequisite:

  • You must have opened an energy system project and planned it up to the project page Energy system.

Procedure:

  1. Click on the button [Electrical loads].
  2. The Electrical loads dialog box will open.
  3. Make the required changes under the tab Electrical load profiles.
  4. If necessary, add a new load profile. To do so, click on [Add new load profile].
  5. To add another load profile, click on the button [Add additional load profile].
  6. Make required changes under the tab Electricity purchase and costs (before).
  7. To copy the electricity purchase from the information provided under the tab "Load profiles", enable the checkbox such as load profiles.
  8. To calculate the electricity purchase costs according to the defined purchasing tariff, select the option Calculation using purchasing tariff.
  9. Click on [Accept changes].
    Configuring loads
    Configuring the heat demand