Setting Communication Monitoring

The [Settings] button lets you select whether you want to monitor the communication between Sunny Portal and your system. If you would like monitoring, you can specify at what interval and how strictly this monitoring should take place.

Sunny Portal can only display current data of the Sunny Home Manager and switch loads if the data request interval is set to Automatic.

Requirement:

Procedure:

  1. In the area Communication Monitoring, select [Settings].
  2. Click the slider below Alerts and, holding the left mouse button pressed, set the monitoring strength according to which Sunny Portal is to notify you by e‑mail.
    These options can be selected: off, liberal, tolerant and sharp.
  3. The result of the selected setting (time interval: 15 minutes) is shown in the column Time.
  4. Enter the e-mail address(es) of the recipient(s) in the text field Recipient. If you enter several e-mail addresses, separate these by commas. (Only e-mail addresses already registered in Sunny Portal are authorized.)
  5. Activate/deactivate monitoring for devices shown.
  6. Click on [Save].

Setting the data request interval for the Sunny Home Manager:

The interval for the data request can be specified in the menu Configuration under Device overview > Properties > Edit ( > Setting the Data Request Interval) The options are automatic, hourly or daily.

The Sunny Home Manager can only request data of the devices that have Data request activated ( > Activating Data Acceptance).

    Configuring PV System Monitoring
    Setting the Inverter Comparison