Activating or Deactivating Grid Management Services
As part of grid management services, it may be necessary to implement grid operator specifications for active power limitation and for reactive power feed-in in your PV system. The Sunny Home Manager can receive these specifications via Ethernet-based communication. The grid operator can set up this link. For this, you have to activate grid management services for the Sunny Home Manager.
Procedure:
- Select the appropriate option in the area Grid management services via Ethernet based communication:
- If the Sunny Home Manager does not have to implement any grid operator specifications, select No (default setting).
- If the Sunny Home Manager has to implement any grid operator specifications, select Yes.
The default setting Port 502 can normally remain set. - Change the port if necessary:
If there are several Modbus devices in the network or if the grid operator specifications are to be transmitted via a certain port, enter this port in Port xxx.
If you change this port, you must also change the port in your VPN router and inform the grid operator of this change. - Click on [Save].
- The data is being transferred. This can take up to 5 minutes.