Overview of Menus and Pages


Depending on your system design and the products installed in your system, you may not see all menus and pages listed here.

System Selection Menu

The name of the currently chosen system will be used for the main menu item under the System selection main menu. All other pages always refer to the currently selected system. The menu is only shown if your e-mail address is assigned to more than 1 system. In this menu, you can select the required system.

Page

Explanation

System List

Overview of systems that are assigned to your e-mail address.

"Sunny Home Manager System" menu

This menu contains all information, data, and visualizations for your system. You can usually adapt the visual representation of the data in the tables and diagrams shown here to your wishes and needs. You can also access the associated page from each page in the configuration menu to make changes in the configuration of your system.

Most data and graphics are only fully displayed on these menu pages if both a feed-in meter and grid-supply meter are connected. The Sunny Home Manager functions both as a feed-in meter and grid-supply meter.

Page

Explanation

System overview

Overview of the most important information about your system. To obtain more detailed information on individual data, you can switch directly from this page to the more specific pages.

PV System Profile

Overview with information for the current system. Sunny Portal compiles the system profile from information that you have entered on your Sunny Portal pages. Information that you have not entered is not shown in the system profile.

Current Status And Forecast

This page is divided into 2 areas:

  • The area Current Status visualizes which portions of your household are being supplied with power from the utility grid and from your PV system respectively.

  • The area Forecast and Recommended Action gives an overview of the expected PV power as well as recommendations on the manual switching-on of loads.

Energy balance

Visualization of the temporal progression of the power or energy flowing between your PV system, your household, the utility grid and, possibly your battery.

Load balance and control

Display of the power and energy consumption of the connected loads.

Annual comparison

Summary of the total yield and the specific system yield per month in a year overview.

System monitoring

Display of various functions for monitoring the current system:

  • Communication monitoring: monitoring of the communication between Sunny Portal and the devices installed in the system.

  • Inverter comparison: Only if at least 2 inverters are present in the system, system monitoring by comparing the inverter yields.

  • SMA Smart Connected

  • System configuration: Only if new devices have been identified in the system and these still need to be configured.

If an exclamation mark is displayed in the page and menu selection next to the System Monitoring menu item, this indicates either an error in the communication or a device configuration that still needs to be completed.

System Logbook

Display of messages in connection with the current system status. These messages help you to identify system disturbances, for example. The number of unread warning, disturbance and fault messages is indicated after the colon.

Analysis

Display of the power values of individual or multiple devices or the overall system for the period selected with the tab. You can choose between the display types absolute" or specific.

A summary of the current diagram data can be found under Details.

Report

The page is divided into Daily system report and Monthly system report.

Depending on the selection, meter change of the total yield is displayed.

Devices

Display of the individual devices that are integrated in the system.

In separate diagrams, for each individual device the total yield (kWh) over 1 year and the total yield (kW) as well as the power (kW) on a defined day is shown.

Smart Home

Temperature display

If you have FRITZ!DECT radio-controlled sockets or FRITZ!DECT thermostats, the temperature around the respective device will be displayed.

Configuration Menu

When logging in to Sunny Portal, the menu Configuration is collapsed by default.
The main purpose of the configuration menu is the basic setup of your system and changes you want to make to general system settings or for the configuration of your devices. You can also carry out all configurations directly from the respective pages of the menu "Sunny Home Manager system".

Refer to the User rights User Groups and User Rights) to find out which individual configurations of the system you can carry out.

Page

Explanation

System properties

On this page, you can use the various tabs to configure your Sunny Portal system.

PV System Presentation

You can release selected pages of your system for viewing, include your system profile into your own internet presence, and specify which Sunny Portal page is to be displayed first for your PV system upon login or after switching PV systems.

Device Overview

List with all devices of your system. You can call up device properties, parameters, and messages of these devices. You can search for new devices and update the list.

Load Overview
and planning

Display of all loads configured with the Sunny Home Manager. Load planning shows loads for which certain time periods are configured and when these loads are to operate.

Report configuration

On this page you can configure Sunny Portal to inform you by e-mail of events and other information such as yield.

User administration

List of all users to whom you have granted access to the system.