Connecting the Sunny Home Manager to the Router

Additionally required material (not included in the scope of delivery):

  • 1 network cable

Network cable requirements:

The cable length and quality affect the quality of the signal. Observe the following cable requirements:

  • Cable type: 100BaseTx

  • Cable category: minimum CAT5e

  • Plug type: RJ45 of Cat5, Cat5e, Cat6 or Cat6a (Cat7 plugs cannot be used)

  • Shielding: S/UTP, F/UTP or higher

  • Number of insulated conductor pairs and insulated conductor cross-section: at least 2 x 2 x 0.22 mm²

  • Maximum cable length between 2 nodes when using patch cables: 50 m

  • Maximum cable length between 2 nodes when using installation cables: 100 m

  • UV-resistant for outdoor use.

Procedure:

    2647607180
  1. Connect the network cable to the network terminal of the product.
  2. Connect the other end of the network cable to the router.
    Preparing for Speedwire Communication
    Testing the Connection to Sunny Portal