Load Overview and Planning


This menu page is divided into 2 areas:

  • Load overview - shows the loads that are configured for use with Sunny Home Manager.
    You can view and change the configuration at any time or add new loads.

  • Load planning - provides a graphical overview of the scheduled time periods in which the active loads must be operated (dark-colored bar) or can be operated (light-colored bar).
    Loads with direct communication are not listed here.

7949014412

Load overview and planning (example)

Position

Designation

Explanation

A

Filter options

Using the filter options, you can filter the list of loads. Selecting the option Active loads will hide the loads that are currently not assigned to a switching device and therefore not controlled by the Sunny Home Manager.

B

Load list

List of loads which have been configured for use with the Sunny Home Manager.

C

Load icon

Symbol of the load

D

Name of load

Name of the load with assigned color

A new color can be selected from the color palette.

E

Type of load

Type of the load

F

Status

Status of the load

= OK

The load is fully configured and can receive data.

= Not active

Load is not assigned to a switching device.

= Load is not fully configured

G

Configuration

Opens the tab Name of Load, on which you can configure the load properties.

H

Add loads

Using this button, you can add further loads to the Sunny Home Manager system.

Smart appliances are recognized automatically by the configuration wizard and are displayed under Device overview > Overview of new devices. Following successful registration, the devices are displayed on the page Load Overview and Planning in the area Load Overview.

I

Loads with time period setting

Only loads are shown here for which time periods were configured Configuring the Time Period).
Loads directly communicating with the Sunny Home Manager are not shown here.

K

Weekdays

For each individual weekday time periods can be configured for the loads.

L

Configuration: CAN time period (light blue)

Can only be configured in systems with self-consumption

The load will only be switched on during the time period if certain conditions have been met.

M

Configuration: MUST time period (dark blue)

The load will always be switched on during the time frame.