Setting the Inverter Comparison

Requirements:

  • There must be at least 2 inverters in the system that generate PV power.

  • You must have the user role Installer or PV System Administrator ( > User Groups and User Rights).

Procedure:

  1. In the area Inverter comparison, click on [Settings].
  2. Enter the e-mail address of the recipient in the text field Recipient. If you enter several e-mail addresses, separate these by commas.
  3. The PV array power is preset in the text field Generator capacity. Sunny Portal calculates the PV array power based on the nominal power of each inverter.
    You can also enter the PV array power manually or have Sunny Portal calculate it if you have entered information on the strings before ( > Configuring Strings).
  4. In the text field Tolerance, enter the permissible tolerance for the inverter's specific yield. This simultaneously sets the deviation of the inverter specific yield from which e-mail notification by Sunny Portal will be triggered.
  5. To select an inverter for the inverter comparison, activate the checkbox Monitoring in the line of the inverter.
  6. Click on [Save].

    Also see:

    Setting Communication Monitoring
    Activating SMA Smart Connected