Configuring Load Characteristics
Depending on the load, you will be shown different input screens; all entries are load-specific.
As soon as a load has been configured, only the general information can be changed. In order to change a load's configuration once made, the relevant load must be deleted and reconfigured.
You can set most of the inputs for configuring a load according to a common principle.
Procedure:
- In the page and menu selection, select either
Configuration > Load overview and planning
or
Sunny Home Manager System > Load Balance and Control. - This opens the table showing the loads integrated in your system.
- In the line of the desired load, select the Configuration symbol.
- This opens the Load characteristics page.
Example of a program-controlled load
- Entering general information
- Selecting the Load Type
- Selecting Program Controllability
- Entering the Power Consumption
- Entering the Maximum Program Operating Time
- Entering the Minimum Switch-On and Switch-Off Time
- Setting the Priority of the Load
- Assigning a Switching Device
- Setting Measuring and Switching of the Assigned Device
- Setting Automatic Switch-Off