Assigning a Switching Device
If a load is connected to the Sunny Home Manager via a switching device, you must assign the switching device to the load:
So that the Sunny Home Manager can measure the energy consumption of the load
So that the Sunny Home Manager can read out the data of the load and control the load
So that the Sunny Home Manager save the data of the load
If a load was temporarily not assigned to any switching device, corresponding data gaps will appear in the diagrams such as Current status and forecast.
A load can be connected to another (free) switching device at any time and controlled via this; the measured values or consumption data basically remain with the load and can only be called up via the load itself.
Procedure:
- In the drop-down list Device assignment, assign a device to the load for measuring and/or switching. By default, no switching device is assigned to the load.
If the desired switching device is already assigned to a different load, a "*" will be displayed in front of the name of the switching device. In order to be able to reassign the switching device, you must first remove the assignment of the switching device in the profile of the other load.