Configuring Niko Home Control

The Sunny Home Manager communicates with Niko products such as radio-controlled sockets only indirectly via the Niko Home Control Hub.

Requirements:

  • You need to have commissioned your Niko system with the Niko Home Control programming software or app (see manufacturer's manual).

  • The Niko products connected to the Niko Home Control Hub must have been correctly connected and commissioned (see manufacturer's manual).

  • The Niko Home Control Hub must have at least software version 2.15.1.83.

  • The Niko Home Control Hub must be located in the same network as the Sunny Home Manager.

Procedure:

  1. In the menu Configuration, click on Device overview.
  2. Click on Properties in the row of the Sunny Home Manager.
  3. Click on [Edit].
  4. Go to Niko Home Control system and select Yes under Home Control Hub available.
  5. In the Home Control Hub address: line, enter the address under which the Niko Home Control system can be reached in your home network.
    The address can be entered either in the form of the IP address of the hub or in the form "fp00112a22a8b6.local" (example), where 00:11:2a:22:a8:b6 corresponds to the Mac address of the hub.
  6. Click on [Save].
  • After a few minutes, the Niko products appear in the Overview of new devices and can now be configured.
    Configuring the display of the current status
    Setting the Edimax Smart Plug