Activating SMA Smart Connected


SMA Smart Connected can only be used in Sunny Portal when this feature is supported by the devices connected to the Sunny Home Manager.
In general, each device can be enabled for Smart Connected, however this must be carried out for each individual device and also for each individual country separately (manually).

In order to be able to participate in the Smart Connected program, you must give your approval.
For optimal use of the program, you should also provide the operator and installer data, the delivery address for any replacement that may be required, and the e-mail address of the recipient of the monitoring data.

Procedure:

  1. In the menu System monitoring click on [Settings] in the field SMA Smart Connected.
  2. The device properties of the product that supports the SMA Smart Connected function opens.
  3. Select [Edit].
  4. In the field SMA Smart Connected place a checkmark to give approval.
  5. Click on [Save].

Alternative procedure:

  1. Call up the menu page Configuration > Device overview.
  2. Select the device that supports the SMA Smart Connected function and call up Properties.
  3. Select [Edit].
  4. In the field SMA Smart Connected place a checkmark to give approval.
  5. Click on [Save].