Requirements for Mounting the Sunny Home Manager

  • The mounting location must be indoors.

  • The Sunny Home Manager must be installed in a switch cabinet.
    The short-circuit current (circuit distributor or subdistributor) must not exceed 6 kA.

  • The mounting location must be protected against dust, moisture and corrosive substances.

  • The cable route from the mounting location to the router must not exceed a maximum length of 100 m.

  • A minimum distance of 1 m must be maintained from devices using the 2.4 GHz radio spectrum (e.g. WLAN devices, microwave ovens). This will prevent reduced connection quality and data transmission speed.

  • The ambient conditions at the mounting location must be suitable for the operation of the Sunny Home Manager ( > Technical Data).

    Mounting
    Mounting the Sunny Home Manager on the Top-Hat Rail