Adding an Inverter

Requirements:

The new device must be in operation.
Tip: Keep note of the serial number of the device you want to add.
For the new SMA device, the default password 1111 for the user group Installer or the system password of the existing system must already be set ( > Changing Passwords).
In the new device this must be set: Data collection activated ( > Activating Data Acceptance).
For the Sunny Home Manager this must be set: Data request interval Automatic ( > Setting the Data Request Interval).

Procedure:

Under Configuration > Device overview select the tab Overview of new devices.
Select device after preselection via the device filter or in the list and activate via .
The configuration wizard opens and provides the further procedure step by step.
Enter the device name. You can also select and edit one of the suggestions displayed.
Enter the Phase and Generator power in the device properties.
When required, activate inverter comparison and enter a percentage value for the tolerance in the system monitoring.
Select [Next].
A summary of your entries is displayed.
If the data are correct, select [Finish].

The new SMA device is displayed under Configuration > Device overview.
It can take up to 20 minutes to replace an inverter using the configuration wizard.