Configure the digital output (MFR)

Qualified person

Requirements:

  • A signal source must be connected to the digital output (MFR).

  • The charging station to which the signal source is connected must be configured as System Manager.

  • The user interface must be open and you must be logged in as Installer or Administrator.

Procedure:

  1. Select the product in the focus navigation.
  2. Select the menu Configuration.
  3. Select the menu item I/O configurations.
  4. Select the type of the I/O channel Digital output.
  5. Select the use for the digital output.
  6. If necessary, activate inversion of the signal. Observe the pin assignment of the terminal block.
  7. Click on [Save].
    Use of the digital output (MFR)
    Configuring the fast stop function