LED Signals
LED signal | Explanation |
|---|---|
Green LED and red LED are flashing simultaneously | Device not configured. Operation of the product is stopped because the initial configuration was not completed. The product automatically starts operation as soon as the configuration has been carried out (e.g. using the commissioning wizard or via a System Manager). |
The green LED is glowing | Charge mode Active charging process, the vehicle is being charged. |
The green LED is blinking slowly | Waiting for start conditions. The charging station is waiting for specifications from the energy manager (e.g., Sunny Home Manager 2.0). |
The green LED flashes quickly | Fast charging activated Fast charging is started locally at the product by means of the knock code. |
Yellow LED on | Charging station is locked; charging release is required in order to start the charging process (e.g., via app or RFID) ( > Charging release) |
Yellow LED flashing slowly | Automatic registration of new RFID cards is active. |
Yellow LED flashing asymmetrically | Registration of a new RFID card was completed successfully. |
Yellow LED flashing | Authentication failed RFID card not known / invalid. Charging not released. |
Yellow LED flashing quickly | Authorization complete. Charging is released. |
The red LED is glowing | Error Operation of the product has been stopped. In addition, a distinct event message and the corresponding event number will be displayed on the product user interface or in the Sunny Portal ( > Event messages). |
Red LED flashing | Warning Communication with the energy manager has failed, or the charging rate is reduced due to a higher-level safety function (e.g., blackout protection). The charging station continues to operate with restricted function. In addition, a distinct event message and the corresponding event number will be displayed on the user interface ( > Event messages). |
Red LED flashing | Charging process interrupted. Incompatible vehicle. |
Blue LED flashing slowly | Communication connection is being established. The product is establishing a connection with a local network or is establishing a direct connection to a smart device (e.g., smartphone, tablet or laptop). |
Blue LED flashing quickly | The function "Find device" (Parameter.Sys.DevSig) has been activated via the System Manager. The product identifies itself accordingly. |
The blue LED is glowing | There is an active connection with a local network or there is a direct connection with a smart device (e.g., smartphone, tablet or laptop). |
Blue LED is off | There is no active communication connection. |
All 3 LEDs are on | Product update or booting procedure. |
Ambient lighting at the type 2 charging port | The ambient lighting helps to illuminate the charging location in the dark. |
Also see: