Decommissioning the Product

Qualified person

To decommission the charging station completely at the end of its service life, proceed as described in this section.

CAUTION

Risk of injury due to weight of product

Injuries may result if the product is lifted incorrectly or dropped while being transported or mounted.

  1. Transport and lift the product carefully. Take the weight of the product into account.
  2. Wear suitable personal protective equipment for all work on the product.

Procedure:

  1. Disconnect the charging station from voltage sources ( > Disconnecting the product from voltage sources).
  2. Insert a screwdriver into the openings on the terminal blocks and remove the AC cable.
  3. If the multifunction relay is used, remove the connection cable from the charging station.
  4. If other cables (e.g., network cables or signal cables) are connected, remove them from the charging station.
  5. Close the charging station cover.
  6. Unscrew the two screws that attach the charging station to the mounting bracket using a screwdriver (TX25).
  7. Lift the charging station up and off the mounting bracket.
  8. If the charging station is to be stored or shipped in packaging, pack the charging station. Use the original packaging or packaging that is suitable for the weight and dimensions of the charging station.

    Also see:

    Disposal
    Technical Data