Close the enclosure cover.
Qualified person
Procedure:
- Close unused enclosure opening with filler plugs.
- Ensure that all seals are properly positioned in the grooves provided. If a seal has come lose, reinsert the seal into the groove. Ensure that the seal is not twisted, pinched or damaged, and that the transitions and joints are in the intended positions.
- Carry out a visual inspection before closing the enclosure. Ensure that all seals are fully in place and that there are no gaps or damages to prevent mounting errors and the ingress of moisture.
- First, insert the enclosure lid at the bottom of the enclosure at an angle of about 70° and then carefully push it forward.
- The cover audibly snaps into place.
- Fasten the two screws (M5x8) from the scope of delivery on the right and left sides (TX25, tightening torque: 2.2±0.2 Nm).
