Configuring the System with the SMA 360° App

Qualified person

Requirement:

  • The product must be switched on.
  • The latest firmware must be installed on all system components.
  • All system components must be located in the same network.
  • An SMA ID must be available.

    Procedure:

    1. Download the SMA 360° App from the App Store or Play Store.
    2. Open the SMA 360° App and log in with the SMA ID.
    3. If a system consists of multiple products and Wi-Fi is to be used for configuration, the subordinate products must each be connected to the network separately. In the SMA 360° app, go to Setup > Network setup to establish a Wi-Fi connection with the product. Follow the instructions. When requested by the app, scan the QR code of the product. It can be found on the type label of your product. Perform this process for each subordinate product within the system.
    4. To start the commissioning wizard, go to Setup > Commissioning.
    5. Follow the SMA 360° app instructions and scan the QR code of the product when prompted by the app to configure it as the System Manager.
    6. Select Device as System Manager in the device settings, then continue with the app instructions.
      Switching on the product
      Commissioning via User Interface