Commissioning Procedure of System with the SMA 360° App

The entire system can be configured with the SMA 360° app following the connection of the individual components. SMA Solar Technology AG recommends using the SMA 360° app (firmware version ≥ 3.0) to configure the system.

Procedure

Connect and switch on all devices in the system (e.g. inverter, energy meter, battery) and integrate the subordinate devices for commissioning via Wi-Fi into the local network.

Manual of the devices

Carry out the configuration using the commissioning wizard of the SMA 360° app. To do this, scan the QR code of the planned System Manager.

Configuring the System with the SMA 360° App

( > Configuring the System with the SMA 360° App)

If needed, make further settings (e.g. activate charging release, teach RFID cards, start or finish charging process).

( > Operation)

    Also see:

    Commissioning
    Switching on the product