Configuring the electricity tariff and feed-in tariff

The electricity tariff is set to 0 regardless of currency.

Enter the relevant electricity tariff.

You require an active electricity tariff and a feed-in tariff at all times to optimize your energy management and ensure a clear display of your savings.

  1. Go to Tariffs via the Configuration side menu.
  2. In the Currency section, click the button and select the applicable currency from the dropdown menu.
  3. In the Tariff Overview section, the electricity tariff and feed-in tariff can be configured manually. As long as one of the two tariffs is not configured, a notification (Configure manual tariffs) will be displayed.
    Information: If no feed-in tariff is received, enter a value of 0.
  4. Click the button to set the electricity tariff.
  5. Enter the name for the manual tariff under Name.
  6. In the Electricity tariff area, select the Tariff type from the dropdown menu.
  7. If you select Fixed, enter the electricity price in the Electricity price field.
  8. If Dynamic is selected, both additional segments Electricity market and Markup become visible.
  9. With a dynamic tariff, the electricity price is determined by the power exchange market. The region is automatically selected based on the system's location.
    Information: It may happen that the region cannot be detected automatically. In this case, select the region.
  10. In the Electricity market area, the region can be adjusted using the button . Currently, the regions DE-LU, BE and NL are available.
  11. In the Markup area, you can choose between Simplified and Detailed.
  12. When purchasing energy, you generally do not pay the exact power exchange price, but rather a higher price that covers costs such as grid fees and taxes, etc. The markup is calculated per kWh, with no annual fees.
  13. Under Simplified, a fixed markup in €/kWh must be entered. An exemplary market price is supplemented with the markup and displayed as an exemplary electricity rate.
  14. Under Detailed, the information from the electricity provider can be entered.
  15. If Time-based is selected, configure the base tariff and additional segments. Use + Add tariff section to add further tariff sections as required.
  16. Confirm with [Save].
  17. Configured tariffs appear in the dropdown menu.
  18. Tariffs from the external partner Lichtblick SE are displayed above the manually configured tariffs.
  19. The currently valid tariff is marked as "active." Other configured tariffs are displayed as "inactive" or "scheduled."
    Settings for the feed-in tariffs and electricity prices
    Configuring the energy management of battery systems