Network cable requirements

To be able to connect the Sunny Home Manager to the router, you also need 1 network cable that meets the following requirements:

  • Cable type: 100BaseTx

  • Cable category: minimum CAT5e

  • Plug type: RJ45 of Cat5, Cat5e or higher

  • Shielding: S/UTP, F/UTP or higher

  • Number of insulated conductor pairs and insulated conductor cross-section: at least 2 x 2 x 0.22 mm²

  • Maximum cable length between 2 nodes when using patch cables: 50 m

  • Maximum cable length between 2 nodes when using installation cables: 100 m

  • UV-resistant if installed outdoors

    Establishing Speedwire Communication
    Connecting the Sunny Home Manager to the Router