Configuring the display of the current status
Qualified person
The current status of the grid supply and the grid feed-in can be displayed via an LED lamp and thus support you in your load control:
When the LED light is green, "surplus" PV energy is available, which the Sunny Home Manager could use to operate additional loads.
You can increase your self-consumption quota by having additional loads managed by the Sunny Home Manager.When the LED light is red, the household is consuming more energy than is generated via PV. This additional demand is met by purchasing energy from the utility grid for a fee.
The LED lamp is not one of the maximum number of devices that can be controlled by the Sunny Home Manager, so it does not reduce its number.
The Sunny Home Manager exclusively controls the color change of the LED lamp. The Sunny Home Manager does not perform on/off switching or dimming of the LED lamp or power measurement.
Requirements:
For the AVM FRITZ!DECT 500 LED lamp, you need to use a FRITZ!Box with DECT as well as FRITZ!OS version 7.20. How to establish a DECT connection and set up the LED lamp can be found on the manufacturer's website at https://avm.de/service/wissensdatenbank/dok/FRITZ-DECT-500/3541_FRITZ-DECT-500-im-FRITZ-Box-Heimnetz-einsetzen/
Procedure:
- Go to Communication options via the side menu Configuration.
- Go to the field AVM FRITZ!Box Smart Home control.
- To configure the AVM FRITZ!Box Smart Home controller, click on the pencil icon .
- In the Status display of line, select the previously commissioned LED lamp from the drop-down list.
- Confirm with [Save].