Adding SMA devices or loads

Requirements:

  • The new device must be in operation.

Procedure:

  1. Go to [Device management] via the side menu Configuration.
  2. Add a new device via the button .
  3. Select SMA device or load.
  4. Click on [Next].
  5. Select the device via the button. In doing so, observe the information in Sunny Portal powered by ennexOS.
  6. Click on [Next].
  7. Define the Nominal system power when selecting PV inverters.
  8. Click [Continue] to confirm.
  9. The device is added to the Sunny Home Manager system.
    Pairing Loads via an EEBus Interface
    Replacing a Sunny Home Manager