Connection via compatible radio-controlled socket and separate relay

The radio-controlled socket can switch a relay with potential-free output, which can be controlled on the input side via 230 VAC. The actual load, in this case the heat pump, is put into operation by the output of the relay. If 230 VAC is applied to the relay via the radio-controlled socket, the SG Ready control input is active and the heat pump starts or is set to the programmed operating mode, e.g. to preferentially consume excess PV energy.

13468693004

Connection of a heat pump via compatible radio-controlled socket and separate relay

    Integration of heat pump into the system
    Connection via compatible relay