Sunny Home Manager operating states
The operating states can be read out via the LEDs on the device ( > Light-Emitting Diodes (LEDs)). The following statuses can be displayed:
LED | Status | Explanation |
|---|---|---|
Status LED | Off | The Sunny Home Manager is switched off. |
glowing green | Sunny Home Manager is switched on. | |
flashing green | The firmware is being updated. | |
glowing red | Sunny Home Manager is starting. | |
flashing red | No connection to Sunny Portal powered by ennexOS. | |
COM LED | Off | No Ethernet connection. |
glowing green | Ethernet connection is established. | |
flashing green | Sunny Home Manager is sending or receiving data. | |
Performance LED | Off | Sunny Home Manager is not registered in Sunny Portal powered by ennexOS. |
glowing green | Energy management in Sunny Home Manager is running smoothly. | |
flashing green | An error has occurred. The error was already reported to Sunny Portal powered by ennexOS. | |
glowing red | An error has occurred. The error was not yet reported to Sunny Portal powered by ennexOS. | |
flashing red | No connection to Sunny Portal powered by ennexOS. |
More than one LED can be illuminated. The following statuses can be displayed:
LED | Status | Explanation |
|---|---|---|
Status LED | glowing green | There is a connection to Sunny Portal powered by ennexOS, and the registration in the Portal has already been executed. |
Performance LED | glowing green | |
Status LED | glowing green | There is a connection to Sunny Portal powered by ennexOS, but the Sunny Home Manager must still be registered in the Portal. |
Performance LED | Off | |
Status LED | flashing red | The Sunny Home Manager cannot establish the connection to Sunny Portal powered by ennexOS automatically. |
Performance LED | flashing red |
Also see: