Configuring AVM FRITZ!Box Smart Home Control

Qualified person

The Sunny Home Manager communicates with FRITZ!DECT products such as radio-controlled sockets or thermostats only indirectly via the FRITZ!Box.

Requirements:

  • You must have a FRITZ!Box with Smart Home software support.

  • The FRITZ!Box must be equipped with the DECT function.

  • The FRITZ!DECT products connected to the FRITZ!Box must have been correctly connected and commissioned (see manufacturer's manual).

  • The radio-controlled sockets connected to the FRITZ!Box must be able to measure the energy consumption.

  • You must be logged in to your FRITZ!Box with a user name and password. You should have this data ready, as the settings for the FRITZ!Box login must be the same in the home network and in the Sunny Home Manager.

Procedure:

  1. Go to Communication options via the side menu Configuration.
  2. Go to the field AVM FRITZ!Box Smart Home control.
  3. Activate/deactivate the AVM FRITZ!Box Smart Home control via the slider.
  4. To configure the AVM FRITZ!Box Smart Home controller, click on the pencil icon .
  5. Select the type of the required login in the home network of the FRITZ!box. SMA recommends FRITZ!Box user and password.
  6. Enter FRITZ!Box address and login credentials.
  7. Confirm with [Save].
    Configuring Edimax Smart Plug
    Configuring Shelly Smart Home Control