Configure peak load shaving

  1. Go to Energy management via the side menu Configuration.
  2. Start the edit via the button in the area Peak load shaving.
  3. Activate/deactivate the peak load shaving via the slider.
  4. Enter the value as required under Threshold for peak load shaving.
  5. In the area Threshold for switching operating modes (multiuse), use the slider to set the percentage of the operating mode that should be switched from increased self-consumption to peak load shaving.
  6. Activate the checkbox in the area Automatic threshold adjustment.
  7. Confirm with [Save].

    Also see:

    Settings for peak load shaving
    Adding a Switching Device