Switching the heat pump directly via compatible relay

  1. Adding a compatible relay to the system e.g. for a Modbus device: set up Modbus connection and include Modbus device in the system; add Modbus device ( > Adding Modbus Device).

  2. Connect the heat pump to the compatible relay and define basic load characteristics, including, for example, the correct power consumption, the minimum running time and that the heat pump should only be switched ( > Connection via compatible relay).

  3. Configure the time period ( > Setting or changing the time windows).

    Also see:

    Switching of heat pump via compatible radio-controlled socket and separate relay
    Configuring a heat pump as directly communicating loads via the SEMP protocol