Design of the Foundation for the Outdoor Version of the Battery Cabinet
When designing the foundation, how the cable and the condensate hose is laid must be taken into consideration. If required, prepare cable conduits to enable cable routing after installation.
Design of the foundation for the outdoor version: The top figure shows a cross-section from the front; the bottom figure shows a top view of the foundation with and without the battery cabinet (dimensions in mm)
Position | Designation | Dimension |
|---|---|---|
A | Anchoring points for the sleeve anchors included in the scope of delivery | - |
B | Condensate hose route | Ø 20 mm |
C | Rear area without foundation | ≤800 mm x 371 mm |
D | Front area without foundation | ≤964 mm x 560 mm |