Event E010
Qualified person
Event message:
Emergency Stop Signal
Explanation:
The system has received a signal indicating that the emergency switch has been activated, suggesting a possible emergency situation on site.
The system immediately activated the highest level of protection: it has stopped all operations and tripped the AC circuit breaker to disconnect the utility grid and prevent further escalation.
Corrective measures:
Check the location to determine the cause of the emergency stop (e.g., device malfunction, danger to personal safety) and eliminate the danger completely.
After ensuring that all safety risks have been eliminated, turn the emergency switch in the direction of the arrow to unlock and reset it.
Once the emergency switch has been reset, you must manually perform the Clear Error or Confirm Restoration operation in the interface of the battery pack control system for the system to return to normal operation.