Configuring the Country Data Set
Qualified person
During configuration of a storage or battery-backup system the inverter is configured to the country data set for VDE-AR-N 4105.
The country data set must be set correctly.
If you select a country data set which is not valid for your country and purpose, it can cause a disturbance in the PV system and lead to problems with the grid operator. When selecting the country data set, you must always observe the locally applicable standards and directives as well as the properties of the PV system (e.g. PV system size, grid-connection point).
- If you are not sure which country data set is valid for your country or purpose, contact your grid operator for information on which country data set is to be configured.
The basic procedure for changing operating parameters is explained in another section ( > Changing Operating Parameters).
Procedure:
In the parameter group Grid monitoring > Grid monitoring select the parameter Set country standard and set the required country data set.