Saving the Configuration in a File

You can save the current configuration of the inverter in a file and use this file as a backup for this inverter. When saving, only the device parameters will be saved, not any passwords.

You can import the saved file to configure the inverter. When doing so, however, no settings can be overwritten from the installation assistant. For single-cluster systems, you must perform the data import on the master.

Procedure:

  1. Activate the user interface ( > Establishing a connection to the user interface).
  2. Log into the user interface ( > Logging In and Out of the User Interface).
  3. Select the menu Device Configuration.
  4. Select [Settings].
  5. In the context menu, select [Saving the configuration in a file].
  6. Follow the instructions in the dialog.
Updating the Firmware
Adopting a Configuration from a File