Activating the energy management

Qualified person

Requirements:

  • A suitable energy meter is installed and configured at the point of interconnection within the system.

  • A battery is available in the system and has been put into operation.

  • The user interface is open and you are logged in.

  • The operating mode for active power must be set to Closed-loop control.

Procedure:

  1. Select the menu item Energy management in the menu Configuration.
  2. Select Advanced settings.
  3. Select Control by SMA energy management.
  4. Finish by clicking [Save].

    Also see:

    Energy management
    Deactivating the energy management