Installing the External Fan Assembly

Qualified person

  1. Insert the fan assembly into the inverter.
  2. Tighten the provided M4 screw on the fan holder (PH2, torque: 1.5 Nm).
    3. 13841257868
  3. Restore the plug connections of the fans in the original order by pushing the plug into the jack of the plug connection while pressing on the bulge of the lock hook at the same time.
  4. The plug snaps into place.
    5. 13841258252
  5. If the connectors of the inverter and the fans do not fit correctly into each other, use the adapters from the scope of delivery.
  6. Insert the sealing plate of the fan and fix it with the screw (PH2, torque: 1.5 Nm).
  7. Recommission the inverter ( > Commissioning the Product).

    Also see:

    Removing the Fan Assembly
    Technical Data