Changing Operating Parameters

Qualified person

The operating parameters of the inverter are set to certain values by default. You can change the operating parameters to optimize the performance of the inverter.

This section describes the basic procedure for changing operating parameters. Always change operating parameters as described in this section.

Requirements:

  • Changes to grid-relevant parameters must be approved by the responsible grid operator.

  • If parameters that can only be changed after logging in as a service provider are set, the setting of the parameter must be described in the documentation.

  • You are logged in on the user interface.

Procedure:

  1. Click on [Device monitoring] in the menu.
  2. Select [Parameters].
  3. Select the desired parameter group.
  4. Change the required parameters.
  5. Select [Save settings] to save the changes.
    Changing the Password
    Configuring SMA ShadeFix