Configuring the Country Data Set
Qualified person
By default, the inverter is not set to a specific country data set. In order for the inverter to be able to feed in, a country data set must be set. The country data set must be adjusted to the installation site.
The country data set must be set correctly.
If you select a country data set which is not valid for your country and purpose, it can cause a disturbance in the PV system and lead to problems with the grid operator. When selecting the country data set, you must always observe the locally applicable standards and directives as well as the properties of the PV system (e.g. PV system size, grid-connection point).
- If you are not sure which standards and directives are valid for your country or purpose, contact the grid operator.
Prerequisites:
You are logged in on the user interface as Installer ( > Logging into the user interface as an installer).
Procedure:
- Click on [Device monitoring] in the menu.
- Select [Initialization].
- Select the desired country data set from the drop-down list Grid code settings.
- Confirm change of the setting with [Save settings].
Also see: