Requirements for the Mounting Location
WARNING
Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires. This can result in death or serious injury.
- Do not mount the product in areas containing highly flammable materials or gases.
- Do not mount the product in potentially explosive atmospheres.
Do not mount the inverter in living areas.
Specialists must have exclusive access to the mounting location.
A solid support surface must be available (e.g., concrete or masonry, free-standing constructions).
The mounting location must be suitable for the weight and dimensions of the product.
The mounting location must not be exposed to direct solar irradiation. If the product is exposed to direct solar irradiation, the exterior plastic parts might age prematurely and overheating might occur. When becoming too hot, the product reduces its power output to avoid overheating.
For mounting to the profile rails: at least 2 profile rails must be available for mounting.
For mounting to the profile rails: the support surface of the frame to which the profile rails are attached should be firm and level (e.g. concrete). Non-fulfillment of these criteria may restrict servicing.
All ambient conditions must be met.