Establishing a connection via Ethernet or cellular phone in the local network

Web browser displays warning

After the access address of the product has been entered, a message might appear indicating that the connection to the user interface of the product is not secure.

  1. Continue loading the user interface (scroll to bottom and click proceed/advance).

Requirements:

  • The product must be connected to the local network via a network cable (e.g. via a router).

  • The product must be integrated into the local network.
    Information: You can change the network configuration on the user interface of the product.

  • A smart terminal device (e.g. laptop) must be available.

  • The smart terminal device must be in the same local network as the product.

  • The respective latest version of one of the following web browsers must be installed on the smart terminal device: Chrome, Edge, Firefox or Safari.

Procedure:

  1. Open the web browser of your smart terminal device.
  2. Enter the access address of the product in the address bar of the web browser.
  3. The login page of the user interface opens if the product has already been configured.
  4. Input the login data of the default setting into the login field to log in. SMA Solar Technology AG strongly recommends changing the password to a secure password during the first session Changing the Password.

Login data of default setting:

  • User: operator

  • Password: service.kraft

    Access addresses for the product in the local network
    Establishing a connection via USB in the local network