Wall Mounting

CAUTION

Risk of injury due to weight of product

Injuries may result if the product is lifted incorrectly or dropped while being transported or mounted.

  1. Wear suitable personal protective equipment for all work on the product.

Additionally required mounting material (not included in the scope of delivery):

  • Screw anchors for wall mounting

Procedure:

    8638204812
  1. Mark the position of the 5 drill holes using the drilling template. Align the markings horizontally.
  2. Drill the holes using a suitable drill bit.
  3. Depending on the support surface, insert screw anchors (not included in the scope of delivery) into the drill holes.
    4. 12499579532
  4. Secure the wall mounting bracket using the 4 screws (M5x60) in the scope of delivery.
    5. 12499579916
  5. Optional: Secure the cable holder to the wall with the 5 screws (6x50) in the scope of delivery of the cable holder set (TX30).
    6. 12499580300
  6. Hook the product onto the wall mounting bracket.
    7. 8644076300
  7. Open the enclosure cover with the supplied key.
    8. 8638205964
  8. Pull off the grounding cable at the cover.
    9. 11015602316
  9. Remove the safety cover. To do so, loosen the 2 nuts. For the products EVCB-LB-3AC-ECC-10 and EVCB-3AC-ECC-10, safety seals are on the 2 nuts.
    10. 11014987788
  10. Secure the product with the sealing washer and the screw (M5x60) from the scope of delivery (PH5).
  11. Ensure that the product is securely in place.
    Requirements for Mounting
    Mounting the charging stand